Benelli M4 Shell Holder for Mesa Stock

Benelli M4 Urbino Shell Holder Sizes

The Benelli M4 Shell Holder for the Mesa Urbino Stock comes in 2 different sizes: 4-round and 6-round. They are designed and made by Mesa Tactical exclusively for the Benelli M4 Mesa Stock with Cheek Riser; It is not designed to attach to any other stock. The stocks pictured are sold separately.

Recommendations

We recommend the 6-round shell holder to all Benelli M4 owners that have the Mesa Urbino stock installed. When installed, the 4 or 6-round shell holder shifts the balance point slightly to the rear giving your Benelli M4 the feeling of being lighter when shouldered. Adding weight to your shotgun also reduces recoil, which is welcomed when shooting high brass loads.

Machining and Finish

CNC precision machined using high strength, low weight 6061-T6 Aluminum. Anodized in a type 3 hard coat matte black finish to match the receiver of your shotgun. Both versions of the Benelli M4 shell holder have holes machined on the sides, and groves cut on the back to reduce weight.

Shell Holding System

Using Mesa Tactical’s rubber friction retention system, shells can be inserted upwards or downwards and will stay firmly in place until needed. Both Benelli M4 shell holders come with a black and a white elastic retainer, the black comes installed, and works well for most users. The white is included in the box and is stiffer for better retention.

More Accessories

If you are looking for even more capacity to the exterior of your shotgun, we recommend the Benelli M4 Shell Holder for attaching up to 8 additional shells to the receiver. Mesa also makes the Benelli M4 Handguards for M-Lok mounting and 922(r) compliance.

Included in the Box

The 4 or 6-round shell holders come with 2 screws and 2 nuts. The proper sized Allen wrench, and the white elastic retainer is included. 

Installation of the Benelli M4 Mesa Shell Holder

Installation is quick and easy. Take off the butt pad by pressing bottom button. Remove the cheek riser by pulling back and apart. Line up the shell holder holes to cheek riser holes and screw in the 2 screws into the nuts. Finally, reattach the cheek.

Weights

• 4-round right side - SKU: 90140 - 4.0oz
• 6-round right side - SKU: 90150 - 5.6oz
• 4-round left side - SKU: 90160 - 4.0oz