Benelli M4 Handguard

Benelli M4 Handguard Key Points:

• 922(r) Compliant
• 12" Overall Length
• 8.7oz Installed
• Only Adds 3.1oz vs. Polymer Forends
• 35 M-LOK Slots Across 7 Rows
• 6061 Aluminum
• Black: Type 3 Hard Coat Anodized
• H2O: NP3® Plated
• 5-Slot Polymer Picatinny rail included
• Fully Dehorned and Deburred
• 100% Made in USA
• Authorized Dealer - MI Lifetime Warranty

Benelli M4 Modernized Handguard:

The Benelli M4 Handguard by Midwest Industries is a popular upgrade among Benelli M4 owners. Modernize your Benelli M4 with the MI Handguard. This new design allows you to mount a flashlight or sling mount without a separate flashlight mount. It also allows you to extend your non-dominant arm up the handguard into a more effective and modern way of shooting.

Benelli M4 Handguard M-Lok Slots:

Featuring a total of 35 M-Lok slots along its 7 rows covering nearly the entire handguard. This allows you to customize your shotgun to any personal preferences. The sleek, modern design converts your Benelli M4 into a unique and tactical-looking shotgun. Great for mounting: lights, lasers, illuminators, grips, hand stops, sling mounts, or any other M-Lok accessory. Not to mention the M-Lok slots have a dual purpose lowering the weight of the handguard with less material.

Benelli M4 Handguard Clone Compatibility:

The MI Benelli M4 Handguard is made specifically for the Benelli M4 but may fit some clones. Below is a list of compatible clones so far (the list is from customer feedback and is not 100% confirmed).

• Toros Copolla T4 – YES
• Panzer Arms M4 – YES
• MAC1014 – YES 
• SDS M4 – Yes

Benelli M4 Handguard Grip:

The 2-inch-thick diameter of the Benelli M4 handguard is perfect for all-sized hands. It partially wraps around the barrel making it much easier to get a firm grip to keep your shotgun steady when putting shots on target. It includes an area with a lip to rest your thumb without touching the hot barrel. Dimples and grooves are machined on the lower half of the handguard to add additional grip and styling.

Benelli M4 Handguard Machining and Finish:

Made from 6061 aluminum and coated in a durable type-3 hard coat anodized matte black layer. The H2O version is NP3® plated to match the H2O version Benelli M4s.

Precision machined for the perfect fit every time. The Benelli M4 handguard is completely deburred and dehorned for the shooter’s safety. Built to last a lifetime and includes a lifetime warranty from Midwest Industries.

Made in America:

The Benelli M4 Handguard by MI is 100% made in America. It replaces the Benelli factory polymer forend set so it counts as a 922(r) part.

Benelli M4 Handguard Installation:

Installation of the Benelli M4 handguard can be accomplished in about a minute with proper practice. Includes additional installation instructions along with the MI instructions. Removal of the factory front sling using snap ring pliers is required for installation. See above for the installation video. Installation is recommended to be completed by a qualified gunsmith.

Includes:

Comes with all the tools and parts necessary for installation. Includes a 5-slot polymer Picatinny rail. Comes with installation instructions and stickers.

Benelli M4 Handguard Weight and Dimensions:

The Benelli M4 Handguard weighs in at only 8.7oz, only about 3.1 ounces more than the factory polymer handguard and sling attachment. handguard wall thickness is 0.1 inches thick making it the perfect mix between strength and weight. It is 12 inches in length and 2 inches in diameter.