Benelli M4 Red Dot Mount - Scalarworks

Overview
The Scalarworks Sync/01 mount comes in two different profiles with two more coming to market soon (ACRO and DDP). The first option is the SW1100 which is the Benelli M4 RMR mount. The second option is the SW1200 which is the Benelli M4 Micro mount.
 
Features
These Benelli M4 red dot mounts enhance the effectiveness of your shotgun by maintaining factory ergonomics. With an ultra-slim profile, the shooter can maintain a proper cheek wield. This allows you to co-witness the red dot with the factory iron ghost sights. It also features a watertight design that removes the need for sealing plates.
 
Materials and finish
The Benelli M4 red dot mounts are precision machined from one of the strongest aluminum alloys on the market. Aluminum grade 7075-T6 is stronger than many steel grades, meaning it will be able to easily handle years of use. The Type III anodizing layer increases the surface hardness and corrosion resistance of the aluminum. The screws and hardware is all made from hardened 4140 which is flash nitride. Made from USA materials.
 
Machining
The Benelli M4 red dot mounts by Scalarworks uses a patented mounting design that allows four points of contact: two through holes, and two key-slots, for a secure mount to the receiver. The sleek design has aggressive-looking curves and angles that looks like a piece of are when mounted to your Benelli. The design not only looks good but is also functionally lightweight by removing any excess material. All of the Scalarworks Benelli M4 red dot mounts are precision CNC machined to fit your M4 perfectly every time. Machined in the USA.
 
Benelli M4 RMR Mount (SW1100)

• Thickness Between Optic and Receiver: 0.102” (2.59mm)
• Center height over receiver: 0.54” (13.7mm)
• Co-witness: Lower-Tenth
• Weight: 0.54oz (18g)
• Also Compatible with: M2 Tactical, M3, M4, M1014, Vinci Tactical, Super Vinci, Super Black Eagle II, Super Black Eagle III, Stoeger M3000
• Trijicon Reflex Optics: RM01, RM02, RM03, RM04, RM05, RM06, RM07, RM08, RM09, SRO1, SRO2, SRO3
• Holosun Reflex Optics: 407C, 507C, 508

 
Benelli M4 Micro Mount (SW1200)

• Thickness between optic and receiver: 0.153” (3.89mm)
• Center height over receiver: 0.54” (13.7mm)
• Co-witness: Lower-Eighth
• Weight: 0.71oz (20g)
• Also Compatible with: M2 Tactical, M3, M4, M1014, Vinci Tactical, Super Vinci, Super Black Eagle II, Super Black Eagle III, Stoeger M3000
• Aimpoint Optics: CompM5, Duty RDS, CompM5b, Micro H-1, Micro H-2, Micro T-1, Micro T-2
• Holosun Optics: 403B, 403C, 403GL, 403R, 503BU, 503C, 503CU, 503FL, 503G, 503GU, 503R, 515C, 515CM, 515CT, 515GM, 515GT, 530C, 530G
• Note: some optics may not co-witness with the iron sights.

 
Benelli M4 ACRO Mount
COMING SOON
 
Benelli M4 DPP Mount
COMING SOON