Benelli M4 Recoil Tube | 6-position

Six length-of-pull settings instead of three — and the fix for M1014 owners whose "collapsible" stock refuses to collapse.

KEY FEATURES & BENEFITS

• Six LOP positions spaced 0.75" apart, from 9.25" (collapsed) to 14.25" (extended)
• Direct-fit replacement for OEM 3-position (70130/70043) or single-position M1014 tubes
• High-quality steel with a durable black nitride finish
• Retaining ring pre-installed — ready out of the box
• Engraved position markers for fast, confident adjustments

PRODUCT DESCRIPTION

Many civilian M1014 owners discover their "collapsible" stock is actually fixed in the extended position — a 922(r) compliance measure from the factory. This tube resolves that, restoring full adjustability while giving you double the OEM tube's positions.

All internal parts from your existing recoil tube reuse directly with this one; installation requires heat to remove the factory thread locker. Full instructions are linked below.

FULL SPECIFICATIONS & INSTALLATION

• Full position table (LOP measured from center of trigger to center of buttpad): Position 1 — 9.25" (fully collapsed, for compact storage/transport). Position 2 — 11.25" (shortened, close-quarters use). Position 3 — 12" (intermediate, useful with body armor or added gear). Position 4 — 12.75" (intermediate, wide range of body types). Position 5 — 13.5" (near-full extension, most standard shooting). Position 6 — 14.25" (fully extended, maximum LOP). A take-down notch marked "OFF" sits between positions 5 and 6 for stock removal.
• For comparison: the OEM 3-position tube offers 9.25" / 12.25" / 14.25" LOP; the OEM 1-position tube is fixed at 14.25".
• Why the civilian M1014's collapsible stock won't collapse: the limited-edition civilian M1014 (identifiable by its American flag receiver engraving) ships with a single-position recoil tube fixed at full extension, a factory 922(r) compliance measure. This aftermarket tube restores true adjustability — confirm your own 922(r) compliance before installing a collapsible stock.
• Installation: heat the thread locker to remove the old recoil tube and nut; all internal parts from the old tube transfer over (this tube ships with the retaining ring pre-installed but no other internals). Full PDF instructions available on the product page.

COMPATIBILITY

Benelli M4 and M1014 only. Not compatible with the EXT collapsible stock or clones.

Get real stock adjustability — order the 6-position recoil tube today.