{"title":"Shell Tactical","description":null,"products":[{"product_id":"benelli-m4-wolff-magazine-spring","title":"Benelli M4 Wolff Magazine Spring","description":"\u003cp\u003e\u003cem\u003eFailure to feed on a Benelli M4 tends to show up at three different points — a fresh gun that isn't broken in yet, a tube just pushed from 5 to 7 rounds, or an OEM spring that's finally worn out. This spring covers all three.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURE \u0026amp; BENEFITS:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for 7-round Benelli M4 magazine tubes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtra power gives margin during break-in period, when parts are still stiff and unworn.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompensates for the longer shell column and added friction of extending capacity from 5 to 7 rounds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHolds correct compression longer than the OEM spring, which loses power with age and eventually stops feeding reliably\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShorter solid length than OEM (2.01\" vs. 2.11\") frees up extra internal tube room\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA by Wolff Gunsprings — 70+ years of firearm spring experience\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003eFailure to feed on a Benelli M4 almost always traces back to one of three moments, and the OEM spring is the weak link at all three. The first is a brand-new gun — a fresh action hasn't broken in yet, and that extra internal friction can be enough for the factory spring to come up just short on shell presentation. The second is right after extending magazine capacity from 5 to 7 rounds — pushing a longer column of shells reliably asks for a little extra power. The third is the classic wear case: even on a broken-in gun at stock capacity, the OEM spring loses power over years of use and eventually stops feeding the way it used to.\u003c\/p\u003e\n\u003cp\u003eWolff's high-power spring is built to cover all three. It's intentionally a bit stronger than needed when new, giving it margin during break-in and right after a capacity increase, and it holds that tension longer than the factory spring.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION:\u003c\/h2\u003e\n\u003cp\u003eSolid (compressed) length: approximately 2.01\" vs. approximately 2.11\" for the OEM spring — about 1\/10\" of extra usable tube space.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor maximum internal clearance, pair with the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-follower\" title=\"Benelli M4 Follower\" rel=\"noopener\" target=\"_blank\"\u003eMax Room Follower\u003c\/a\u003e for an additional ~1\/8\" of space and the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-cap\" title=\"Benelli M4 Magazine Cap\" rel=\"noopener\" target=\"_blank\"\u003eTitanium Mag Cap\u003c\/a\u003e for an extra ~1\/2\" of room on top of the spring's savings. \u003c\/p\u003e\n\u003cp\u003eConstruction: closed and squared ends prevent follower binding; high-carbon spring steel, made in the USA.\u003c\/p\u003e\n\u003cp\u003eAvailable as a single spring or a 4-pack.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY:\u003c\/h2\u003e\n\u003cp\u003eOptimized for 7-round Benelli M4 tubes; also works in 5-round tubes and most 12-gauge clones holding 5–7 rounds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCover all three failure points at once — add the Wolff Spring to your order.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Wolff Magazine Spring","offer_id":44885591392546,"sku":"","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Wolff Magazine Springs 4-pack","offer_id":47215026143522,"sku":"","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Wolff_Magazine_Spring_1.jpg?v=1768350566"},{"product_id":"benelli-m4-magazine-extension","title":"Benelli M4 Magazine Extension +2 Round","description":"\u003cp\u003e\u003cem\u003eYour M4 already has 2 rounds of hidden capacity — a false aluminum limiter is blocking it. This titanium extension unlocks it in minutes.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrings a standard M4 from 5+1 to 7+1 capacity\u003c\/li\u003e\n\u003cli\u003eThreads directly onto your OEM 5-round tube — no heat gun, no gunsmithing\u003c\/li\u003e\n\u003cli\u003e1.87oz titanium extension is lighter than the 2.47oz OEM limiter it replaces\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from aircraft-grade titanium and Cerakoted in the USA\u003c\/li\u003e\n\u003cli\u003eVirtually rust and corrosion-proof\u003c\/li\u003e\n\u003cli\u003eBlack or H2O Cerakote finish\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThis is the simplest path to 7 rounds: your OEM tube stays exactly where it is, the limiter comes out, and the extension threads on. No heat, no thread locker, no waiting for the shop to fit you in.\u003c\/p\u003e\n\u003cp\u003eFor best reliability at extended capacity, we strongly recommend pairing this with the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-wolff-magazine-spring\" title=\"Benelli M4 Magazine Spring\" rel=\"noopener\" target=\"_blank\"\u003eWolff Magazine Spring\u003c\/a\u003e — the OEM spring tends to lose power over time and can cause cycling issues under extended capacity.\u003c\/p\u003e\n\u003cp\u003eWant the full-length, permanent 7-round tube instead? See our \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-tube-7rd\" title=\"Benelli M4 Magazine Tube 7rd\" rel=\"noopener\" target=\"_blank\"\u003e7-Round Magazine Tube\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpecs: 6.5\" length (adds 4.5\" to the OEM 5-round tube), 1.87 oz (53g), capacity of 7 rounds of 2¾\" shells or 6 rounds of 3\" shells.\u003c\/li\u003e\n\u003cli\u003eInstallation steps: (1) clear and safe the firearm, field strip the M4; (2) using snap ring pliers, carefully remove the spring retaining ring from the OEM limiter — it's under spring tension; (3) transfer the retaining ring into the new extension; (4) insert the spring and thread on the extension; (5) reassemble.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan't fit 7 rounds even with the extension installed? \u003ca href=\"https:\/\/shelltactical.com\/blogs\/news\/benelli-m4-wont-fit-7-rounds-in-a-7-round-magazine-tube\" title=\"Benelli M4 Max-Room Parts Guide\" rel=\"noopener\" target=\"_blank\"\u003eSee our Max Room parts guide\u003c\/a\u003e for the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-follower\" title=\"Benelli M4 Follower\" rel=\"noopener\" target=\"_blank\"\u003eFollower\u003c\/a\u003e and \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-cap\" title=\"Benelli M4 Magazine Cap\" rel=\"noopener\" target=\"_blank\"\u003eMagazine Cap\u003c\/a\u003e that frees up additional internal clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 \/ M1014.\u003c\/p\u003e\n\u003cp\u003eCustomer-reported clone fits: MAC 1014, Black Aces S4 Pro, Aska M4, SDS Tac12, Sulun Tac12 (Panzer M4, SDS S4, and Gforce Arms M4 do not fit). The \u003ca href=\"https:\/\/shelltactical.com\/products\/mac-1014-magazine-extension\" title=\"MAC 1014 Magazine Extension\" rel=\"noopener\" target=\"_blank\"\u003eMAC1014 version\u003c\/a\u003e is more likely to fit clones. Note: capacity-increasing products do not ship to NJ or MA.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnlock the 2 rounds your M4 is already built for — order the extension today.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Black","offer_id":51503983558946,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"H2O","offer_id":51503983591714,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"FDE","offer_id":51503983624482,"sku":null,"price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/MAC_1014_Magazine_Extension.jpg?v=1776894774"},{"product_id":"benelli-m4-recoil-tube","title":"Benelli M4 Recoil Tube | 6-position","description":"\u003cp\u003e\u003cem\u003eSix length-of-pull settings instead of three — and the fix for M1014 owners whose \"collapsible\" stock refuses to collapse.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSix LOP positions spaced 0.75\" apart, from 9.25\" (collapsed) to 14.25\" (extended)\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for OEM 3-position (70130\/70043) or single-position M1014 tubes\u003c\/li\u003e\n\u003cli\u003eHigh-quality steel with a durable black nitride finish\u003c\/li\u003e\n\u003cli\u003eRetaining ring pre-installed — ready out of the box\u003c\/li\u003e\n\u003cli\u003eEngraved position markers for fast, confident adjustments\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eMany civilian M1014 owners discover their \"collapsible\" stock is actually fixed in the extended position — a 922(r) compliance measure from the factory. This tube resolves that, restoring full adjustability while giving you double the OEM tube's positions.\u003c\/p\u003e\n\u003cp\u003eAll internal parts from your existing recoil tube reuse directly with this one; installation requires heat to remove the factory thread locker. Full instructions are linked below.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFull position table (LOP measured from center of trigger to center of buttpad): Position 1 — 9.25\" (fully collapsed, for compact storage\/transport). Position 2 — 11.25\" (shortened, close-quarters use). Position 3 — 12\" (intermediate, useful with body armor or added gear). Position 4 — 12.75\" (intermediate, wide range of body types). Position 5 — 13.5\" (near-full extension, most standard shooting). Position 6 — 14.25\" (fully extended, maximum LOP). A take-down notch marked \"OFF\" sits between positions 5 and 6 for stock removal.\u003c\/li\u003e\n\u003cli\u003eFor comparison: the OEM 3-position tube offers 9.25\" \/ 12.25\" \/ 14.25\" LOP; the OEM 1-position tube is fixed at 14.25\".\u003c\/li\u003e\n\u003cli\u003eWhy the civilian M1014's collapsible stock won't collapse: the limited-edition civilian M1014 (identifiable by its American flag receiver engraving) ships with a single-position recoil tube fixed at full extension, a factory 922(r) compliance measure. This aftermarket tube restores true adjustability — confirm your own 922(r) compliance before installing a collapsible stock.\u003c\/li\u003e\n\u003cli\u003eInstallation: heat the thread locker to remove the old recoil tube and nut; all internal parts from the old tube transfer over (this tube ships with the retaining ring pre-installed but no other internals). \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_70130_installation_instructions.pdf\" title=\"Benelli M4 Recoil Tube Installation Instructions\" rel=\"noopener\" target=\"_blank\"\u003eFull PDF instructions \u003c\/a\u003eavailable on the product page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 and M1014 only. Not compatible with the EXT collapsible stock or clones.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGet real stock adjustability — order the 6-position recoil tube today.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Benelli","offers":[{"title":"Default Title","offer_id":49206458974498,"sku":"","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Recoil_Tube_6-Position.jpg?v=1787252119"},{"product_id":"benelli-m4-follower","title":"Benelli M4 Follower","description":"\u003cp class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003e\u003cem\u003eA small part that solves two real problems: actually fitting 7 rounds of defensive 2¾\" shells, and a low cost 922(r) compliant part.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003e\"USA\" face engraving gives a tactile, visible signal the moment the tube runs dry\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eMax Room version creates ~3\/16\" extra internal space to help fit 7 rounds of longer crimped shells\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eFlat-face design for smoother, more consistent feeding\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e16% lighter than OEM (standard version) for a quicker response\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eCNC machined from hard-anodized 6061-T6 aluminum\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eCounts as a 922(r) compliant part; 8 color options\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003eThe Standard follower replicates OEM feeding geometry with a 922r compliant and weight edge. The Max Room version exists for one specific frustration: shooters who can't quite get all 7 rounds of longer, roll-crimped 2¾\" shells into a 7-round tube. Extra internal clearance solves that without touching your tube.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003eBoth versions are precision CNC machined and hard-anodized in the USA, and drop into factory and aftermarket magazine tubes.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003eStandard version specs: 0.905\" diameter, 1.02\" length, 0.24 oz (6.9g).\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eMax Room version specs: 0.905\" diameter, 0.79\" length, 0.16 oz (4.6g). With a unique design that frees up roughly 3\/16\" of room compared to the OEM.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eFor maximum internal clearance, pair the Max Room follower with the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-wolff-magazine-spring\" title=\"Benelli M4 Wolff Magazine Spring\" rel=\"noopener\" target=\"_blank\"\u003eWolff Magazine Spring,\u003c\/a\u003e which has a shorter solid length than OEM, or the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-cap\" title=\"Benelli M4 Magazine Cap\" rel=\"noopener\" target=\"_blank\"\u003eTitanium Magazine Cap\u003c\/a\u003e which adds over a half inch of space in the tube.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eColors: Red, Blue, H2O (NP3®), Green, Black, Gray, Orange, Gold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003eBenelli M4 and most clones. Compatible with factory and aftermarket magazine tubes.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 5.0pt;\"\u003e\u003cem\u003eA cheap, easy fix for feeding and fit issues — pick your version and color and add it to your order.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Max Room \/ Red","offer_id":50347399545122,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"Max Room \/ Blue","offer_id":50347399577890,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"Max Room \/ H2O (NP3®)","offer_id":50347399610658,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Max Room \/ Green","offer_id":50347399643426,"sku":null,"price":24.99,"currency_code":"USD","in_stock":false},{"title":"Max Room \/ Black","offer_id":50347399676194,"sku":null,"price":24.99,"currency_code":"USD","in_stock":false},{"title":"Max Room \/ Gray","offer_id":50347399708962,"sku":null,"price":24.99,"currency_code":"USD","in_stock":false},{"title":"Max Room \/ Orange","offer_id":50347399741730,"sku":null,"price":24.99,"currency_code":"USD","in_stock":false},{"title":"Max Room \/ Gold","offer_id":50347399774498,"sku":null,"price":24.99,"currency_code":"USD","in_stock":false},{"title":"Standard \/ Red","offer_id":49513164407074,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Blue","offer_id":49593698877730,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ H2O (NP3®)","offer_id":50347316511010,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Green","offer_id":49593698910498,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Black","offer_id":49593698943266,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Gray","offer_id":49593698976034,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Orange","offer_id":49593699008802,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Gold","offer_id":49593699041570,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Followers.jpg?v=1742414898"},{"product_id":"benelli-m4-charging-handle","title":"Benelli M4 Charging Handle","description":"\u003cp\u003e\u003cem\u003eThe OEM charging handle is about 1\/4\" diameter. This one comes in 1\/2\" or 3\/4\" — noticeably faster to find and rack, whether you're on the clock or fighting cold hands.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for the Benelli M4 bolt carrier group — zero drag or binding\u003c\/li\u003e\n\u003cli\u003eChoose 6Al-4V titanium (as light as 0.34 oz) or hardened chromoly steel for maximum durability\u003c\/li\u003e\n\u003cli\u003e½\" or ¾\" knurled diameter for a faster, more positive grip than OEM\u003c\/li\u003e\n\u003cli\u003e3-notch, non-free-spinning design resists spinning inside the bolt carrier\u003c\/li\u003e\n\u003cli\u003eDeburred, knurled surface holds traction even under stress\u003c\/li\u003e\n\u003cli\u003eMatte black or H2O-matched Cerakote\/NP3® finish options\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eWhether you're running the M4 in competition, training, or as a duty gun, the charging handle is one of the most-used controls on the shotgun — and the factory part is undersized for how often you'll touch it. This upgrade drops straight into the OEM bolt carrier with a simple twist-out, twist-in install.\u003c\/p\u003e\n\u003cp\u003eTitanium keeps the swap essentially weight-neutral (the ½\" titanium handle weighs less than OEM), while steel trades a bit of weight for maximum toughness. Either way, you get a handle that's easier to find and faster to run.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeights by configuration: ½\" Titanium 0.34 oz (9.6g) · ¾\" Titanium 0.46 oz (13.2g) · ½\" Steel 0.58 oz (16.4g) · ¾\" Steel 0.84 oz (23.7g) · OEM handle for reference: ~0.41 oz (12g).\u003c\/li\u003e\n\u003cli\u003eDiameter options: ½\" (≈1.27cm) and ¾\" (≈1.90cm), both well above the OEM's ~⅓\".\u003c\/li\u003e\n\u003cli\u003eFinish options: Titanium in Black or H2O Cerakote; Steel in Black finish or NP3® (matches H2O).\u003c\/li\u003e\n\u003cli\u003eNote: the 3-notch design resists unwanted spinning under normal use but, like the OEM handle, can still rotate under enough deliberate twisting force.\u003c\/li\u003e\n\u003cli\u003eInstallation: unload and safety the firearm, twist\/pull the OEM handle free per your manual, then twist in the replacement — no tools or modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 \/ M1014. M4 Clones.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePick your size and material, and upgrade the control you touch every single reload.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"1\/2\" \/ Black \/ Titanium","offer_id":49038913700130,"sku":"","price":74.99,"currency_code":"USD","in_stock":true},{"title":"1\/2\" \/ Black \/ Steel","offer_id":49996075172130,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true},{"title":"1\/2\" \/ H2O \/ Titanium","offer_id":49996075204898,"sku":null,"price":74.99,"currency_code":"USD","in_stock":true},{"title":"1\/2\" \/ H2O \/ Steel","offer_id":49996075237666,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Black \/ Titanium","offer_id":49038913765666,"sku":"","price":74.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Black \/ Steel","offer_id":49996075270434,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ H2O \/ Titanium","offer_id":49996075303202,"sku":null,"price":74.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ H2O \/ Steel","offer_id":49996075335970,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/BenelliM4ChargingHandles1.jpg?v=1725488323"},{"product_id":"benelli-m4-bolt-release-tab","title":"Benelli M4 Bolt Release Tab","description":"\u003cp\u003e\u003cem\u003eRun the bolt with three fingers instead of one. This spring-steel tab bolts onto your factory release and turns a fingernail-sized button into a real control.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases OEM bolt release surface area by over 19 times\u003c\/li\u003e\n\u003cli\u003eHeat-treated spring steel bends, not breaks — built for years of hard use\u003c\/li\u003e\n\u003cli\u003eInstalls in under 30 seconds, no tools required\u003c\/li\u003e\n\u003cli\u003eAdds virtually no weight: 0.14 oz (4g)\u003c\/li\u003e\n\u003cli\u003eMatte black or H2O (NP3®) finish, 100% made and hand-finished in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eFaster follow-up shots start with faster bolt manipulation, and the factory release — less than a quarter-inch across — just isn't built for it. This tab covers the OEM button externally, adding a wide, easy-to-find surface that works even with gloves on.\u003c\/p\u003e\n\u003cp\u003eIt's compatible with OEM polymer forends and the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-forend\" target=\"_blank\" title=\"Benelli M4 Mesa Forend\" rel=\"noopener\"\u003eMesa Forend,\u003c\/a\u003e but won't fit the Midwest Industries handguard, factory aluminum LE handguard, or EXT\/LE-style bolt releases.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eOEM polymer forends and the Mesa Forend. Works on clones with 2-piece polymer forends.\u003c\/p\u003e\n\u003cp\u003eNot compatible with the Midwest industries Handguard, factory aluminum handguards, or EXT\/LE\/Aftermarket bolt release pads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA low cost upgrade that pays for itself the first time you run the gun with gloves on — grab yours today.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Black","offer_id":49476673241378,"sku":"","price":24.99,"currency_code":"USD","in_stock":true},{"title":"H2O (NP3®)","offer_id":49476673274146,"sku":"","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Bolt_Release_9.jpg?v=1729549034"},{"product_id":"benelli-m4-trigger-guard","title":"Benelli M4 Trigger Guard","description":"\u003cp\u003e\u003cem\u003eA trigger guard that does more than guard the trigger — a built-in loading ramp speeds up single and double loading alike.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated shell guide ramp engineered for both double and quad loading techniques\u003c\/li\u003e\n\u003cli\u003eEnlarged loading area effectively doubles loading efficiency vs. factory polymer\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from billet aluminum with tight tolerances\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCounts as a 922(r) compliant part — made in the USA\u003c\/li\u003e\n\u003cli\u003eBlack hard anodize or H2O NP3® plated finish, fully dehorned and deburred\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThe factory polymer trigger guard is functional but offers nothing beyond holding the trigger. This billet aluminum version adds a real loading ramp that makes two-at-a-time reloads noticeably faster while also giving you a more rigid, premium-feeling metal guard.\u003c\/p\u003e\n\u003cp\u003eAll internal components transfer directly from your existing trigger guard. Snap ring pliers are strongly recommended for installation, and a qualified gunsmith is recommended for first-timers.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 5\" L x 0.9\" W x 2\" H. Weight: 2.55 oz (72g).\u003c\/li\u003e\n\u003cli\u003e922(r) note: parts do not need to be stamped to count as USA-made — this trigger guard may or may not be stamped, but still fully qualifies.\u003c\/li\u003e\n\u003cli\u003eOften paired with the upgraded \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-safety\" title=\"Benelli M4 Safety\" rel=\"noopener\" target=\"_blank\"\u003eBenelli M4 Safety,\u003c\/a\u003e the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-trigger-group\" title=\"Benelli M4 Trigger Group\" rel=\"noopener\" target=\"_blank\"\u003eBenelli M4 Trigger Group\u003c\/a\u003e, and the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-extended-carrier\" title=\"Benelli M4 Extended Carrier\" rel=\"noopener\" target=\"_blank\"\u003eBenelli M4 Extended Carrier\u003c\/a\u003e since all three are typically handled during the same trigger disassembly\/reassembly session.\u003c\/li\u003e\n\u003cli\u003eA\u003ca href=\"https:\/\/shelltactical.com\/blogs\/news\/benelli-m4-trigger-group-disassembly-reassembly-guide\" title=\"Benelli M4 Trigger Installation Guide\" rel=\"noopener\" target=\"_blank\"\u003e full disassembly\/reassembly guide\u003c\/a\u003e is available on the product page to walk through the internal component transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4, M1014. MAC1014\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eReload faster and upgrade your 922(r) parts count in one part — order the billet trigger guard today.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Black","offer_id":51595081679138,"sku":null,"price":229.0,"currency_code":"USD","in_stock":true},{"title":"H2O (NP3®)","offer_id":51595081711906,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Trigger_Guard.jpg?v=1776892606"},{"product_id":"benelli-m4-recoil-tube-plunger-retaining-ring","title":"Benelli M4 Retaining Ring for Recoil Tube","description":"\u003cp\u003e\u003cem\u003eA tiny part that's easy to lose and a pain to remove — keep a spare or two on hand before you need one mid-project.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Benelli part #70071\u003c\/li\u003e\n\u003cli\u003eHigh-quality spring steel with black corrosion-resistant coating\u003c\/li\u003e\n\u003cli\u003eRetains the recoil tube plunger inside the recoil tube where it belongs\u003c\/li\u003e\n\u003cli\u003eSold as a single ring or a 5-pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThis retaining ring is one of the most commonly requested small parts we carry — usually because the OEM ring is stubborn to remove without damage, or because it's simply gone missing during a build. Keep a few in your parts bin.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eFits inside the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-recoil-tube\" title=\"Benelli M4 Recoil Tube\" rel=\"noopener\" target=\"_blank\"\u003eBenelli M4 Recoil Tube\u003c\/a\u003e (part #70071).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDon't get stuck mid-build over a cheap part — order a spare retaining ring now.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"One","offer_id":49886591123746,"sku":"","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Five","offer_id":49886591156514,"sku":"","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Retaining_Ring_for_Recoil_Tube.jpg?v=1746230775"},{"product_id":"handmade-fridge-magnets","title":"Handmade Gun Safe Magnet","description":"\u003cp\u003e\u003cem\u003eA small, handmade way to personalize your gun safe, fridge, or toolbox — sharp-looking and genuinely useful.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClean 2.5\" x 2.5\" cut size, ideal for safes, fridges, toolboxes, or office boards\u003c\/li\u003e\n\u003cli\u003eHandcrafted individually for authentic, non-mass-produced character\u003c\/li\u003e\n\u003cli\u003eStrong magnetic backing holds tight to metal surfaces\u003c\/li\u003e\n\u003cli\u003eFour designs available: Come and Take It, An Italian Classic, Don't Tread on Me, Molon Labe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003ePractical enough to hold notes and receipts in place, sharp enough to be worth displaying — these magnets are handmade one at a time, so each one carries a bit of individual character you won't get from a mass-produced version.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eAny magnetic surface.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePick your favorite design and add a handmade touch to your safe or shop.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Come and Take It","offer_id":50347276206370,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"An Italian Classic.","offer_id":50347276239138,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Don't Tread on Me","offer_id":50347276271906,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Molon Labe","offer_id":50347276304674,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Come_and_Take_It_Flag_Fridge_Magnet.jpg?v=1758318834"},{"product_id":"shell-tactical-egift-card","title":"Shell Tactical eGift Card","description":"\u003cp\u003e\u003cem\u003eNot sure which upgrade they want? Let them pick — an instant eGift card redeemable on anything in the store.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDelivered instantly by email — no shipping wait\u003c\/li\u003e\n\u003cli\u003eChoose your own amount\u003c\/li\u003e\n\u003cli\u003eRedeemable on any product storewide\u003c\/li\u003e\n\u003cli\u003eThe easy answer for birthdays, holidays, or \"just because\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eEvery serious Benelli M4 owner has a wish list. An eGift Card skips the guesswork and lets them apply it toward the exact part, finish, or accessory they've been eyeing.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eRedeemable storewide at Shell Tactical.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSend a Shell Tactical eGift Card in minutes — pick an amount and check out.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"$10.00","offer_id":50693944639778,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"$25.00","offer_id":50693944672546,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"$50.00","offer_id":50693944705314,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"$100.00","offer_id":50693944738082,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/SHELL_white_on_red_cropped_81ca21ed-282c-474b-a10e-12536b3969af.png?v=1765760888"},{"product_id":"benelli-m4-magazine-cap","title":"Benelli M4 Magazine Cap","description":"\u003cp\u003e\u003cem\u003eA lighter, better-looking, metal replacement for the factory cap that also buys you extra room for longer defensive shells.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6AL-4V titanium construction weighs just 0.99oz vs. 1.31oz for the OEM polymer cap\u003c\/li\u003e\n\u003cli\u003eAdds 0.547\" of internal magazine tube space when run without the spring retaining ring\u003c\/li\u003e\n\u003cli\u003eDistinctive profile blends classic Benelli styling and 12-gauge rifled-slugs\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined and finished in the USA\u003c\/li\u003e\n\u003cli\u003eBlack, H2O, Midnight Bronze, or FDE Cerakote finishes\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThe extra internal room this cap creates is especially useful for shooters running longer, roll-crimped defensive shells who are fighting to fit a full 7-rounds in the magazine tube. Combine it with the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-follower\" title=\"Benelli M4 Max-Room Follower\" rel=\"noopener\" target=\"_blank\"\u003eMax Room Follower\u003c\/a\u003e and the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-wolff-magazine-spring\" title=\"Benelli M4 Wolff Magazine Spring\" rel=\"noopener\" target=\"_blank\"\u003eWolff Magazine Spring\u003c\/a\u003e for the most internal clearance possible.\u003c\/p\u003e\n\u003cp\u003eIt's a straightforward swap for the OEM cap on the Benelli M4 \/ M1014 and most clones — the Panzer M4 is the one notable exception.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight comparison: 0.99oz (28.4g) titanium vs. 1.31oz (36.9g) OEM polymer cap.\u003c\/li\u003e\n\u003cli\u003eExtra tube space: 0.547\" when installed without the factory spring retaining ring — pair with the Max Room Follower for maximum tube space.\u003c\/li\u003e\n\u003cli\u003eDesign: profile blends the classic OEM Benelli M4 magazine cap shape with the rifled grooves of a 12-gauge slug.\u003c\/li\u003e\n\u003cli\u003eSimple installation that replaces the OEM cap with just a few turns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 \/ M1014 and most clones. Not compatible with the Panzer M4.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShed weight and gain room in one swap — order your titanium magazine cap now.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Black","offer_id":51256451105058,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"H2O","offer_id":51256451137826,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"Flat Dark Earth","offer_id":51256451170594,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"Midnight Bronze","offer_id":51256451203362,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"Raw Ti","offer_id":52557588726050,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Magazine_Cap_Titanium_Colors.jpg?v=1772826918"},{"product_id":"benelli-m4-trigger-group","title":"Benelli M4 Trigger Group","description":"\u003cp\u003e\u003cem\u003eA true drop-in fix for the Benelli M4's most common complaint — a heavy, mushy trigger — cut from roughly 8 lbs to a crisp ~6 lbs with zero fitting or gunsmithing.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrop-in hammer, trigger, and disconnector — no fitting or gunsmithing required\u003c\/li\u003e\n\u003cli\u003eCuts trigger pull weight from roughly 8 lbs to a crisper ~6 lbs\u003c\/li\u003e\n\u003cli\u003eFull system kit: reduced-power hammer, trigger, and firing pin springs, plus a new cartridge drop lever spring\u003c\/li\u003e\n\u003cli\u003eQuick D-clip replaces the fiddly OEM snap ring for noticeably easier disassembly and reassembly\u003c\/li\u003e\n\u003cli\u003eHeat-treated U.S. tool steel with an NP3® base coating or black Cerakote over NP3® for a low-visibility, mil-spec look\u003c\/li\u003e\n\u003cli\u003eCounts as 3 separate 922(r) compliant parts, each engraved \"USA\"\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThe factory Benelli M4 trigger is one of the most consistently criticized parts of the platform — heavy, mushy, and slow to reset. This kit replaces the hammer, trigger, and disconnector with sharp engagement surfaces for a noticeably lighter, cleaner break, benefiting competition, duty, and home-defense use alike.\u003c\/p\u003e\n\u003cp\u003eIt's a full system upgrade, not just three parts: reduced-power hammer, trigger, and firing pin springs come in the box along with a new cartridge drop lever spring, plus a quick-change D-clip that replaces the factory snap ring for far easier future maintenance and inspection. Note: this kit does not include the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-trigger-guard\" title=\"Benelli M4 Trigger Guard\" rel=\"noopener\" target=\"_blank\"\u003eTrigger Guard\u003c\/a\u003e as in the pictures — it's the three-piece trigger group and five springs only.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePull weight: reduces from roughly 8 lbs stock to roughly 6 lbs installed, for a noticeably crisper break.\u003c\/li\u003e\n\u003cli\u003eFinish: every part starts with an NP3® coating for low-friction operation and corrosion resistance. Choose NP3® as-is, or add a black Cerakote finish over the NP3® base for a low-visibility, mil-spec look — either way you keep the NP3® lubricity and corrosion protection underneath.\u003c\/li\u003e\n\u003cli\u003eWhat's included: hammer, trigger, disconnector, reduced-power hammer spring, reduced-power trigger spring, reduced-power firing pin spring, cartridge drop lever spring, and a quick-replacement D-clip (replacing the OEM snap ring).\u003c\/li\u003e\n\u003cli\u003e922(r) count: the hammer, trigger, and disconnector are each U.S.-manufactured and stamped \"USA,\" adding three compliant parts toward your build at once.\u003c\/li\u003e\n\u003cli\u003eInstallation: true drop-in fit, no modification required. Full step-by-step instructions are in our Benelli M4 \u003ca href=\"https:\/\/shelltactical.com\/blogs\/news\/benelli-m4-trigger-group-disassembly-reassembly-guide\" title=\"Benelli M4 Trigger Group Installation Guide\" rel=\"noopener\" target=\"_blank\"\u003eTrigger Group Installation Guide\u003c\/a\u003e. As with any trigger work, run a function check after installation before returning the gun to service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 \/ M1014. May fit clones — compatibility list will be built over time from customer feedback. Fits MAC1014\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGet a crisp, true drop-in trigger upgrade — order the Benelli M4 Trigger Group today.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"NP3®","offer_id":51378119737634,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true},{"title":"NP3® \u0026 Black","offer_id":51378119770402,"sku":null,"price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Trigger_Group_and_Springs.jpg?v=1787701991"},{"product_id":"benelli-m4-magazine-tube-7rd","title":"Benelli M4 Magazine Tube - 7 Round","description":"\u003cp\u003e\u003cem\u003eThe complete, permanent path to 7 rounds — one full-length tube replaces both the OEM tube and the limiter for the cleanest build possible.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTitanium version: just 5.4oz, nearly half the weight of the OEM 5rd tube and limiter.\u003c\/li\u003e\n\u003cli\u003eSteel version: 9.0oz, engraved \"MADE IN USA\"\u003c\/li\u003e\n\u003cli\u003eBoth count as 922(r) compliant parts\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined and Cerakoted in the USA\u003c\/li\u003e\n\u003cli\u003eBlack, H2O, FDE, or uncoated raw titanium finish\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eWhere the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-extension\" title=\"Benelli M4 Magazine Extension\" rel=\"noopener\" target=\"_blank\"\u003e2-Round Extension\u003c\/a\u003e screws onto your existing tube, this is a full replacement — everything from the receiver forward is new. It's a more involved install, but the payoff is a cleaner profile and, in titanium, the lightest muzzle end you can build.\u003c\/p\u003e\n\u003cp\u003eInstallation requires heat to break the factory thread locker; plan 30–60 minutes. We strongly recommend pairing extended capacity with the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-wolff-magazine-spring\" title=\"Benelli M4 Wolff Magazine spring\" rel=\"noopener\" target=\"_blank\"\u003eWolff Magazine Spring\u003c\/a\u003e for reliable cycling.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpecs: 18.25\" length. Titanium weighs 5.4 oz (139g), saving 5 oz vs. the OEM tube + limiter combined. Steel weighs 9.0 oz (256g), saving 1.2 oz vs. OEM. Capacity: 7 rounds of 2¾\" shells or 6 rounds of 3\" shells.\u003c\/li\u003e\n\u003cli\u003eTitanium vs. steel: titanium is the lightest, best-handling option and counts as a 922(r) part but carries no engraving. Steel is engraved \"MADE IN USA,\" counts toward 922(r) compliance, and costs less than titanium.\u003c\/li\u003e\n\u003cli\u003eFinish notes: Black on titanium is a custom dark gray Cerakote that darkens further with gun oil. Black on steel is a matte black oxide that closely matches the Parkerized barrel. H2O and FDE Cerakote options are also available.\u003c\/li\u003e\n\u003cli\u003eInstallation steps: (1) clear and safe the firearm, remove all rounds; (2) remove magazine cap, barrel, foregrips, retaining ring, magazine spring, follower, bolt carrier group, and trigger assembly; (3) heat the OEM tube in a padded vise until the thread locker smokes; (4) unscrew and remove the OEM tube with heat-resistant gloves; (5) thread on the new 7-round tube with 1–2 drops of thread locker; (6) reassemble. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Magazine_Tube_Installation_Instructions.pdf\" title=\"Benelli M4 Magazine tube 7 rounds\" rel=\"noopener\" target=\"_blank\"\u003eFull PDF instructions\u003c\/a\u003e available on the product page.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 \/ M1014.\u003c\/p\u003e\n\u003cp\u003eCustomer-reported: fits on most clones, does not fit Panzer M4. Note: capacity-increasing products do not ship to NJ or MA.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuild the cleanest, lightest 7-round M4 possible — order the full-length tube today\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Titanium \/ Black","offer_id":51504048472354,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"Titanium \/ H2O","offer_id":51504048505122,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"Titanium \/ Flat Dark Earth","offer_id":51504048537890,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"Titanium \/ Uncoated","offer_id":51504048570658,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Black","offer_id":51504048603426,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true},{"title":"Steel \/ H2O","offer_id":51504048636194,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Flat Dark Earth","offer_id":51504048668962,"sku":null,"price":149.99,"currency_code":"USD","in_stock":false},{"title":"Steel \/ Uncoated","offer_id":51504048701730,"sku":null,"price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Magazine_Tube_1.jpg?v=1779997214"},{"product_id":"benelli-m4-magazine-tube-5-round","title":"Benelli M4 Magazine Tube - 5 Round","description":"\u003cp\u003eBuilt for two owners: SBS owners who want to lighten their build, and anyone who wants a convertible replacement tube to switch between 5 and 7-rounds quickly. Want a permanent full-length 7-round setup instead? See the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-tube-7rd\" title=\"Benelli M4 Magazine Tube 7rd\" rel=\"noopener\" target=\"_blank\"\u003eBenelli M4 7-Round Magazine Tube.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensionally matched for short-barreled M4 builds\u003c\/li\u003e\n\u003cli\u003eConvertible: run 5+1 with a limiter, or add the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-extension\" title=\"Benelli M4 Magazine Extension\" rel=\"noopener\" target=\"_blank\"\u003e2-Round Extension\u003c\/a\u003e for 7+1 whenever you want\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from aircraft-grade titanium and Cerakoted in the USA\u003c\/li\u003e\n\u003cli\u003eSignificantly lighter than the OEM steel tube, virtually rust and corrosion-proof\u003c\/li\u003e\n\u003cli\u003eBlack, H2O, FDE, or uncoated raw titanium finish\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eMost M4 owners want more capacity, but SBS builds need the opposite — a magazine tube that matches a shortened barrel. This titanium tube is sized for exactly that, while still giving standard-length M4 owners a lightweight, premium replacement with the flexibility to add capacity later.\u003c\/p\u003e\n\u003cp\u003eInstallation requires heat to break the factory thread locker — plan 30–60 minutes and read the full instructions (PDF linked below) before starting.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cp\u003eCapacity: 5 rounds of 2¾\" shells standalone, or 7+1 with the 2-Round Magazine Extension added.\u003c\/p\u003e\n\u003cp\u003e922(r) note: this titanium tube counts as a 922(r) compliant part when installed on a Benelli M4 — it's machined in the USA. \u003c\/p\u003e\n\u003cp\u003eInstallation steps: (1) clear and safe the firearm, remove all rounds from the chamber, loading gate, tube, and work area; (2) remove magazine cap, barrel, foregrips, retaining ring, magazine spring, follower, bolt carrier group, and trigger assembly; (3) place the receiver in a padded vise and heat the OEM tube (not the receiver) with a heat gun until the thread locker smokes; (4) using heat-resistant gloves, unscrew and remove the OEM tube; (5) thread on the new tube with 1–2 drops of high-strength all-metal thread locker; (6) reassemble in reverse order. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Magazine_Tube_Installation_Instructions.pdf\" title=\"Benelli M4 Magazine Tube installation instructions\" rel=\"noopener\" target=\"_blank\"\u003eFull PDF instructions \u003c\/a\u003eare available on the product page.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 \/ M1014 and SBS configurations. Correct choice for NJ and MA residents (run with a limiter at legal capacity).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGet the tube built for your build, standard or SBS — order the 5-round titanium tube.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Black","offer_id":51504029532450,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true},{"title":"H2O","offer_id":51504029565218,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true},{"title":"Flat Dark Earth","offer_id":51504029597986,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true},{"title":"Uncoated","offer_id":51504029630754,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_5rd_Magazine_Tubes.jpg?v=1780002391"},{"product_id":"benelli-m4-extended-magazine-cap-1-or-3","title":"Benelli M4 Extended Magazine Cap +1 or +3","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cem\u003eAlready maxed out your 7-round tube? This titanium magazine extender cap threads on in seconds and pushes capacity further — no heat gun, no modifications.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e+1 cap: 8+1 on a standard M4, 6+1 on an SBS\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e+3 cap: 10+1 on a standard M4, 8+1 on an SBS — the highest tube-fed capacity available for the platform\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePrecision CNC machined from aircraft-grade titanium and Cerakoted in the USA\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eReplaces your existing OEM magazine cap — no permanent changes\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eIncludes the correct 8-round or 10-round spring for your chosen capacity\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eBlack, H2O, or FDE Cerakote finish options\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eStandard M4 owners who've already hit their 7-round ceiling, and SBS owners working with a shortened tube, both run into the same wall: no more room. This cap gets around it by adding physical tube length at the muzzle end, in titanium to keep the added weight as low as possible.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eInstallation is a straight thread-on swap for the OEM cap — no tools, no gunsmithing. Building capacity from scratch instead? Pair this with our \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-tube-7rd\" title=\"Benelli M4 Magazine Tube 7rd\" rel=\"noopener\" target=\"_blank\"\u003e7-Round Magazine Tube\u003c\/a\u003e or \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-tube-5-round\" title=\"Benelli M4 Magazine Tube 5rd\" rel=\"noopener\" target=\"_blank\"\u003e5-Round Magazine Tube\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eCapacity by configuration: Standard M4 (7rd tube) — 8 rounds with +1 cap, 10 rounds with +3 cap. SBS (5rd tube) — 6 rounds with +1 cap, 8 rounds with +3 cap.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSprings included: the +1 cap ships with an 8-round spring; the +3 cap ships with a 10-round spring.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eColor notes: Black is a custom dark gray Cerakote that deepens further with a light coat of gun oil. H2O is a custom titanium-toned Cerakote made to closely match the factory H2O\/Titanium finish. FDE closely matches OEM flat dark earth M4s.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eInstallation: remove the existing magazine cap and spring retaining ring, and thread on the extension — no heat gun, or gunsmithing required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eOriginal Benelli M4 \/ M1014 with 7-round tube, and SBS configurations with 5-round tube. May fit on clones. Note: capacity-increasing products do not ship to NJ or MA.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cem\u003eSqueeze more rounds out of the tube you already have — order your +1 or +3 cap now.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"+1 Extension \u0026 8rd Spring \/ Black","offer_id":51505909629218,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true},{"title":"+1 Extension \u0026 8rd Spring \/ H2O","offer_id":51505911103778,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true},{"title":"+1 Extension \u0026 8rd Spring \/ FDE","offer_id":51505911136546,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true},{"title":"+3 Extension \u0026 10rd Spring \/ Black","offer_id":51505909661986,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"+3 Extension \u0026 10rd Spring \/ H2O","offer_id":51505911169314,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true},{"title":"+3 Extension \u0026 10rd Spring \/ FDE","offer_id":51505911202082,"sku":null,"price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Extended_Magazine_Caps.jpg?v=1780002723"},{"product_id":"benelli-m4-trigger-carrier-washer","title":"Benelli M4 Trigger Washer","description":"\u003cp\u003e\u003cem\u003eA small, easy-to-lose part inside the trigger housing — hard to find, cheap to replace, and worth keeping a spare of.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCorrect washer for the Benelli M4 polymer trigger housing\u003c\/li\u003e\n\u003cli\u003eSold as a single unit or a 5-pack for shops and repeat builders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThis washer lives inside the trigger carrier and rarely gets attention until it's missing mid-build. We stock it because it's exactly the kind of part that's hard to source in a pinch.\u003c\/p\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eBenelli M4 polymer trigger housing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eKeep your build moving — order a spare washer or two right now.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"One","offer_id":51653340758306,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Five","offer_id":51653340791074,"sku":null,"price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/Benelli_M4_Trigger_Carrier_Washer.jpg?v=1789499164"},{"product_id":"mac-1014-magazine-extension","title":"MAC 1014 Magazine Extension","description":"\u003cp\u003e\u003cem\u003eYour MAC 1014 has 2 rounds of hidden capacity behind a false aluminum limiter. This titanium extension unlocks it in minutes.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FEATURES \u0026amp; BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrings the MAC 1014 from 5+1 to 7+1 capacity\u003c\/li\u003e\n\u003cli\u003eThreads directly onto the OEM 5-round tube — no heat gun, no gunsmithing\u003c\/li\u003e\n\u003cli\u003e1.87oz titanium extension is lighter than the 2.47oz OEM limiter it replaces\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from aircraft-grade titanium, Cerakoted in the USA\u003c\/li\u003e\n\u003cli\u003eBlack or H2O Cerakote finish (H2O is a close but not exact match to factory Marine finish)\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eBuilt specifically for the MAC 1014, this extension follows the same proven design as our Benelli M4 version: pull the limiter, transfer the spring retaining ring, thread on the extension, and you're at 7+1 — no gunsmithing required.\u003c\/p\u003e\n\u003cp\u003eWe strongly recommend pairing extended capacity with the \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-wolff-magazine-spring\" title=\"Benelli M4 Wolff Magazine Spring\" rel=\"noopener\" target=\"_blank\"\u003eWolff Magazine Spring\u003c\/a\u003e, since the factory spring tends to lose power with use and can cause cycling issues at extended capacity.\u003c\/p\u003e\n\u003ch2\u003eFULL SPECIFICATIONS \u0026amp; INSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpecs: 6.5\" length (adds 4.5\" to the OEM 5-round tube), 1.87 oz (53g), capacity of 7 rounds of 2¾\" shells or 6 rounds of 3\" shells.\u003c\/li\u003e\n\u003cli\u003eFinish note: the H2O Cerakote is a close but imperfect match to the factory MAC 1014 \"Marine\" finish, which is glossier and lighter than Cerakote.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation steps: (1) clear and safe the firearm, field strip the MAC 1014; (2) using snap ring pliers, remove the spring retaining ring from the OEM limiter — caution, it's under spring tension; (3) transfer the retaining ring into the new extension; (4) insert the spring and thread on the extension; (5) reassemble.\u003c\/li\u003e\n\u003cli\u003eWant the lightest setup, cleanest look, or guaranteed MAC 1014 fitment instead? See the full-length \u003ca href=\"https:\/\/shelltactical.com\/products\/benelli-m4-magazine-tube-7rd\" title=\"Benelli M4 Magazine Tube 7 rounds\" rel=\"noopener\" target=\"_blank\"\u003eBenelli M4 7-Round Magazine Tube\u003c\/a\u003e which will fit on the MAC 1014 and other clones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCOMPATIBILITY\u003c\/h2\u003e\n\u003cp\u003eMAC 1014, and many other clones. Not the Panzer M4. Note: capacity-increasing products do not ship to NJ or MA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cem\u003eUnlock your MAC 1014's full capacity — order the titanium extension today.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Shell Tactical","offers":[{"title":"Black","offer_id":51561889988898,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true},{"title":"H2O","offer_id":51561890021666,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/3827\/8946\/files\/MAC_1014_Magazine_Extension.jpg?v=1776894774"}],"url":"https:\/\/shelltactical.com\/collections\/shell-tactical.oembed","provider":"Shell Tactical","version":"1.0","type":"link"}